HL-4070CDW
 |
Preguntas frecuentes y Solución de problemas |
Clear white lines or ribbing down the page on 2-sided(duplex) print.
Please check the following points:
1: Choose Thin Paper mode in the printer driver and re-send the print job.
- Open the back cover.
- Pull down the two grey levers, one on the left-hand side and one on the right-hand side, to position B as shown in the illustration below.
Position B is only for 2-sided(duplex) printing with recycled paper when the temperature and humidity are low.
- Close the back cover.
- Choose Plain Paper mode in the printer driver and re-send the print job.
- If the problem is not solved after printing a few pages, choose Thin Paper mode in the printer driver and re-send the print job.
When you have finished printing, open the back cover and reset the two grey levers back to the original position.
2: Use thicker paper than you are now using.
En el caso de que no haya obtenido una respuesta a su pregunta, compruebe las preguntas frecuentes adicionales.
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.
