MFC-J480DW

Preguntas frecuentes y Solución de problemas

Preguntas frecuentes y Solución de problemas

I configured the "IP Config" method of the machine to "Auto" to assign an IP address automatically, however it was changed to "Static" unexpectedly. I get an error message that indicates IP address is not unique, or a document is printed out by the machine I didn't expected.

When wireless network connection is unstable and the APIPA protocol is enabled, you might experience this difficulty.

Follow these steps below to set the BOOT method back to AUTO and disable the APIPA protocol.

 

  1. Press Settings.
  2. Press the Up or Down arrow key to choose Network, and then press OK.
  3. Press the Up or Down arrow key to choose WLAN, and then press OK.
  4. Press the Up or Down arrow key to choose TCP/IP, and then press OK.
  5. Press the Up or Down arrow key to choose BOOT Method, and then press OK.
  6. Choose Auto, and then press OK.
  7. Press the Up or Down arrow key to choose APIPA, and then press OK.
  8. Choose Off, and then press OK.
  9. Press Stop/Exit.

 

En el caso de que no haya obtenido una respuesta a su pregunta, compruebe las preguntas frecuentes adicionales.

¿Ha consultado los manuales?

En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:

Comentarios sobre el contenido

Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.

Paso 1: ¿Considera que la información de esta página le ha resultado útil?

Paso 2: ¿Desearía añadir algún comentario?

Tenga en cuenta que este formulario solo se utiliza para comentarios.