MFC-J480DW
|
Preguntas frecuentes y Solución de problemas |
Forward a fax to another fax machine when my machine has a mechanical problem.
You can transfer faxes in the memory of your machine if one of the following messages is displayed on the LCD:
-
Unable to Clean XX (Clean Unable XX)
-
Unable to Initialize XX or Unable to Init. XX (Init Unable XX)
-
Unable to Print XX (Print Unable XX)
-
Unable to Scan XX (Scan Unable XX)
-
Press Stop/Exit to interrupt the error temporarily.
-
Press Settings or Menu and select Service => Data Transfer => Fax Transfer.
-
Do one of the following:
-
If the LCD shows No Data, there are no faxes left in the machine's memory.
Press Stop/Exit.
-
Enter the fax number to which faxes will be forwarded.
-
Press Black Start or Mono Start.
-
If you have not set up your Station ID, you cannot enter fax transfer mode.
> Click here to see how to set up the Station ID.
-
You can send the Fax Journal report to another fax machine.
Press Settings or Menu and select Service => Data Transfer => Report Trans. in Step 2.
En el caso de que no haya obtenido una respuesta a su pregunta, compruebe las preguntas frecuentes adicionales.
¿Ha consultado los manuales?
En el caso de que necesite ayuda adicional, póngase en contacto con el servicio de atención al cliente de Brother:
Modelos relacionados
DCP-J140W, MFC-250C, MFC-255CW, MFC-290C, MFC-295CN, MFC-490CW, MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, MFC-J220, MFC-J265W, MFC-J410, MFC-J415W, MFC-J430W, MFC-J470DW, MFC-J480DW, MFC-J615W, MFC-J6510DW, MFC-J6710DW
Comentarios sobre el contenido
Con el fin de mejorar nuestro servicio de asistencia, facilite sus comentarios a continuación.