TJ-4020TN
|
Ofte stillede spørgsmål og fejlfinding |
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer
Follow the instructions below:
-
Turn off the printer.
-
Press and hold the Pause button, and then turn on the printer.
-
For the Black Mark Sensor
Release the button when the LED is lit in green/amber (5 times) after the green LED blinks five times alternately.
For the Gap Sensor
Release the button when the LED is lit in red/amber (5 times) after the green/amber LED blinks five times alternately.
You can also calibrate by using the BPM (Brother Printer Management Tool).
Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.