TD-4650TNWB

Ofte stillede spørgsmål og fejlfinding

How to load the Media

Movie: How to load the Media

*The video clip is being streamed from YouTube.

When you use a 38.1 mm (1.5") core roll, it is necessary to convert the core guide so that it should fit a 38.1 mm (1.5") core roll before loading the media.

For details, see the FAQ: "Can I use a 38.1 mm (1.5") paper core?".

Press the tabs on both sides of the printer, and then lift the Roll Compartment Cover.
Slide both Roll Guides outwards.

Insert the paper roll with the labels facing up, as shown in the illustration.
Push down and slide the lock tab to lock the Roll Guides into place.

Make sure that the label print side is facing up.
Slide the Media Guide Tips to the correct position.
Media Guide Tips

Black Mark Sensor

RFID Antenna Slide
(TD-4650TNWBR / TD-4750TNWBR)
- For black mark media or media with notches or holes used to indicate the label length, the Black Mark sensor is moveable. Slide the Media Guide Tips to the correct position.
- For RFID tags, slide the green RFID Antenna Slide to the correct position.
Place the paper, with the printing side facing up, through the media sensor and place the label leading edge onto the Platen Roller. Adjust the green Media Guide Tips to fit the label width.