TD-2125NWB

Ofte stillede spørgsmål og fejlfinding

Ofte stillede spørgsmål og fejlfinding
  • Dato: 26-06-2023
  • Id: faqp00001461_034

How do I connect the printer to my computer via Bluetooth®? (for Windows)

  1. Make sure the printer is turned off.
     
  2. Press and hold the Print button ( Print ), the Feed button ( Feed ) and the Power button ( Power ) until the POWER indicator and the STATUS indicator flash green alternately.
     
  3. Release the Feed button and the Print button whilst keeping the Power button held down.
     
  4. You can change the connection mode by pressing the Print button whilst keeping the Power button held down.
     
  5. Release the Power button when the STATUS indicator turns green and the Bluetooth indicator turns blue to enable Bluetooth.
     
  6. Download Software/Document Installer from the [Downloads] section of this website and then start the installer. P-touch Editor, Printer Setting Tool, and other software are installed in addition to the printer driver.
     
  7. When the [Connection Type] window appears, select [Bluetooth Connection] and click [Next].
    (The screen differs depending on your printer.)
    Connection Type

     

  8. Follow the instructions to finish the installation and pairing.

  9. After installing the printer driver, install P-touch Editor. Then, start P-touch Editor to create and print labels.

Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?

Har du set i manualerne?

Kontakt Brother Support, hvis du har brug for yderligere hjælp:

Feedback til indhold

Giv feedback herunder, så vi kan forbedre vores support.

Trin 1: Hvor hjælpsom har oplysningerne på denne side været?

Trin 2: Ønsker du at tilføje kommentarer?

Bemærk, at denne formular kun bruges til feedback.

Indsend