Innov-is XE1

Ofte stillede spørgsmål og fejlfinding

Ofte stillede spørgsmål og fejlfinding

About the threads and the bobbin case when embroidering

 

Many factors are involved in achieving a beautiful embroidery result. Using the appropriate stabilizer and hooping the fabric in the frame are two important factors mentioned earlier. (Refer to How do I hoop the fabric in the embroidery frame?) Another important point is the appropriateness of the needle and thread being used. See the explanation of threads below.

Thread Upper thread Use embroidery thread intended for use with this machine.
Bobbin thread Use embroidery bobbin thread intended for use with this machine.

If you use threads other than those listed above, the embroidery may not embroider out correctly.

 

 

Bobbin case (recommended for embroidering with included 90 weight bobbin thread)


The included bobbin case is set for 90 weight bobbin thread. When you use different weights of bobbin thread, the tension screw on this bobbin case can be adjusted if necessary.

image (1) Bobbin case (no color on the screw)

When embroidering on large garments (especially jackets or other heavy fabrics), do not let the fabric hang over the table. Otherwise, the embroidery unit cannot move freely and the embroidery frame may strike the needle, causing the needle to bend or break and possibly cause injury. Place the fabric so that it does not hang off the table or hold the fabric to keep it from dragging.

 

Relaterede ofte stillede spørgsmål

Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?

Har du set i manualerne?

Kontakt Brother Support, hvis du har brug for yderligere hjælp:

Feedback til indhold

Giv feedback herunder, så vi kan forbedre vores support.

Trin 1: Hvor hjælpsom har oplysningerne på denne side været?

Trin 2: Ønsker du at tilføje kommentarer?

Bemærk, at denne formular kun bruges til feedback.