Innov-is XP1
 |
Ofte stillede spørgsmål og fejlfinding |
Loops appear on the surface of the fabric when embroidering
-
The thread tension is incorrectly set.
Adjust the thread tension.
Refer to How do I adjust thread tension for embroidering?
-
Under some conditions, based on the type of fabric, stabilizer, or thread being used, there may be some looping in the upper thread.
In this case, attach the included embroidery needle plate cover to the needle plate.
Refer to Using the embroidery needle plate cover.
-
The combination of the bobbin case and bobbin thread is incorrect.
Change the bobbin case or bobbin thread so that the correct combination is used.
Relaterede ofte stillede spørgsmål
Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
