Innov-is XP1
 |
Ofte stillede spørgsmål og fejlfinding |
Bobbin thread does not wind neatly on the bobbin.
-
The thread is not passed through the bobbin winding thread guide correctly.
Correctly pass the thread through the bobbin winding thread guide.
Refer to How do I wind the bobbin?
-
Bobbin spins slowly.
Press 
in the bobbin winding window to increase the bobbin winding speed.
Refer to How do I wind the bobbin?
-
The thread that was pulled out was not wound onto the bobbin correctly.
Wind the thread that was pulled off around the bobbin 5 or 6 times clockwise.
Refer to How do I wind the bobbin?
-
The empty bobbin was not set on the pin properly.
Set the empty bobbin on the pin and slowly turn the bobbin until you hear it click in place.
Refer to How do I wind the bobbin?
Relaterede ofte stillede spørgsmål
Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
