Innov-is XP1
 |
Ofte stillede spørgsmål og fejlfinding |
Machine does not operate.
-
Start/Stop button was not pressed.
Press the Start/Stop button.
 |
(1) Start/Stop button |
-
There is no stitch pattern selected.
Select a stitch pattern.
-
Presser foot is not lowered.
Lower the presser foot.
 |
(1) Presser Foot Lifter button |
-
Start/Stop button was pressed with the foot controller attached.
Remove the foot controller, or use the foot controller to operate the machine.
-
The Start/Stop button was pressed while the machine is set for the sewing speed controller to control the zigzag stitch width.
Use the foot controller instead of the Start/Stop button to operate the machine, or set the Width Control to OFF in the settings screen.
Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?
Kontakt Brother Support, hvis du har brug for yderligere hjælp:
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.
