Innov-is 10/10A
Ofte stillede spørgsmål og fejlfinding |
How do I manually thread the needle?
When using special thread, thread with a thickness of 130/20 or thicker, the wing needle or the twin needle which cannot be used with the needle threader, thread the needle as described below.
-
Thread the machine to the needle bar thread guide.
-
Lower the presser foot lever.
Presser foot lever -
Pass the thread through the eye of the needle from front to back.
- Raise the presser foot lever, pass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine.
Feedback til indhold
Giv feedback herunder, så vi kan forbedre vores support.