Innov-is 55FE
Ofte stillede spørgsmål og fejlfinding |
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
Please check the Bobbin Winder.
If the Bobbin Winder shaft is moved to the right position (bobbin winding mode), the needle will not move.
Please return the Bobbin Winder shaft to the left position and press the Start-Stop Button or Foot Control to start the machine in the sewing mode.
Relaterede modeller
AZ14, AZ17, BC-2100/2300, BC-2500, CS10, CS-8120, DS-120, DS-140, FS100WT, FS-20, FS-40, HF27, HF37, HF53, Innov-is 10/10A, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 50, Innov-is 500D, Innov-is 55, Innov-is 55FE, Innov-is 750E, Innov-is 900, Innov-is 950, J14, J14s, J17, J17s, KD144, KD144s, KD40, KE14, KE14s, KE20, LB14, LM14, LP14, LW14, NX-200, NX-400Q/400, NX-600, PE-300S, RH127, RH137, RL417, RL425, X14, X14s, X17s, XL-2600/2610/2620, XN1700, XN2500, XQ2700, XQ3700, XT27, XT37