QC-1000
 |
Ofte stillede spørgsmål og fejlfinding |
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- Use only the ungummed hook-and-loop fastener which is for sewing. If the glue is attached to the needle or the bobbin hook race, it may cause malfunction.
- If the hook-and-loop is sewn with the thin needle (65/9-75/11), the needle may bend or break.
- Before start sewing, baste together the fabric and the hook-and-loop fastener.
Make sure that the needle passes through the hookand-loop fastener by turning the handwheel and lower the needle into the hook-and-loop fastener before sewing. And then, sew the edge of the hookand-loop fastener at a slow speed.
If the needle does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics.
 |
 Edge of the hook-and-loop fastener |
Relaterede modeller
AZ14, AZ17, BC-2100/2300, BC-2500, CS10, CS-8120, DS-120, DS-140, FS100WT, FS-20, FS-40, HF27, HF37, HF53, Innov-is 10/10A, Innov-is 1200, Innov-is 1250, Innov-is 15, Innov-is 1500D/1500, Innov-is 150SE/ 150, Innov-is 200, Innov-is 2200, Innov-is 27SE, Innov-is 30, Innov-is 35, Innov-is 350SE, Innov-is 400, Innov-is 4000D/4000, Innov-is 50, Innov-is 5000, Innov-is 500D, Innov-is 55, Innov-is 550SE/ 550, Innov-is 55FE, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is I, Innov-is Ie, Innov-is V5, Innov-is V5 LE, Innov-is V7, Innov-is VQ2, Innov-is VQ4, J14, J14s, J17, J17s, KD144, KD144s, KD40, KE14, KE14s, KE20, LB14, LM14, LP14, LW14, NX-200, NX-2000, NX-400Q/400, NX-600, PE-300S, PQ1600S, QC-1000, RH127, RH137, RL417, RL425, SuperGalaxie 3000/3000C/3000D/3100D, X14, X14s, X17s, XL-2600/2610/2620, XN1700, XN2500, XQ2700, XQ3700, XT27, XT37
