MFC-260C

Ofte stillede spørgsmål og fejlfinding

Ofte stillede spørgsmål og fejlfinding
  • Dato: 26-03-2009
  • Id: faq00002577_000

I'm using Mac OS X 10.5. When trying to scan using the Brother ControlCenter2 with the USB interface, the ControlCenter2 screen will close. What should I do?

To solve this issue, you must remove the existing drivers and then download and install the updated scanner driver by following the steps below:

  1. Turn off your Brother machine.
  2. Select MacintoshHD => Library => Image Capture to open the Twain Data Sources folder.


  3. Drag the Brother TWAIN.ds to the trash can.


  4. Turn on your Brother machine.
  5. Click here to download and install the latest "Scanner Driver".

Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?

Har du set i manualerne?

Kontakt Brother Support, hvis du har brug for yderligere hjælp:

Relaterede modeller

DCP-110C, DCP-115C, DCP-117C, DCP-120C, DCP-130C, DCP-135C, DCP-150C, DCP-310CN, DCP-315CN, DCP-330C, DCP-340CW, DCP-350C, DCP-357C, DCP-4020C, DCP-540CN, DCP-560CN, DCP-7010, DCP-7010L, DCP-7025, DCP-750CW, DCP-770CW, DCP-8020, DCP-8025D, DCP-8040, DCP-8045D, DCP-8060, DCP-8065DN, DCP-9040CN, DCP-9045CDN, MFC-210C, MFC-215C, MFC-240C, MFC-260C, MFC-3220C, MFC-3240C, MFC-3320CN, MFC-3340CN, MFC-3420C, MFC-3820CN, MFC-410CN, MFC-425CN, MFC-440CN, MFC-465CN, MFC-4820C, MFC-580, MFC-5840CN, MFC-5860CN, MFC-590, MFC-620CN, MFC-7225N, MFC-7420, MFC-7820N, MFC-820CW, MFC-8220, MFC-8420, MFC-8440, MFC-845CW, MFC-8460N, MFC-8820D, MFC-8840D, MFC-885CW, MFC-8860DN, MFC-8870DW, MFC-890, MFC-9070, MFC-9160, MFC-9180, MFC-9420CN, MFC-9440CN, MFC-9660, MFC-9760, MFC-9840CDW, MFC-9880

Feedback til indhold

Giv feedback herunder, så vi kan forbedre vores support.

Trin 1: Hvor hjælpsom har oplysningerne på denne side været?

Trin 2: Ønsker du at tilføje kommentarer?

Bemærk, at denne formular kun bruges til feedback.

Indsend