DCP-7070DW

Ofte stillede spørgsmål og fejlfinding

Ofte stillede spørgsmål og fejlfinding

JAM TRAY 1

Please follow the steps below to solve the problem:


NOTE: Illustrations shown below are from representative product and may differ from your Brother machine.

 

  1. Pull the paper tray completely out of the machine.
    Pull the paper tray out
  2. Use both hands to slowly pull out the jammed paper.

    Pull out the jammed paper

    If the paper cannot easily be removed in this direction, stop and follow the instructions for Paper is jammed inside the machine. Please refer to FAQ, "JAM INSIDE".

    Pulling out the jammed paper downwards allows you to remove the paper more easily.


  3. Make sure the paper is below the maximum paper mark (1) of the paper tray. While pressing the green paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.
    The maximum paper mark

  4. Put the paper tray firmly back in the machine.

Relaterede ofte stillede spørgsmål

Har du læst andre ofte stillede spørgsmål, hvis dit spørgsmål ikke blev besvaret?

Har du set i manualerne?

Kontakt Brother Support, hvis du har brug for yderligere hjælp:

Feedback til indhold

Giv feedback herunder, så vi kan forbedre vores support.

Trin 1: Hvor hjælpsom har oplysningerne på denne side været?

Trin 2: Ønsker du at tilføje kommentarer?

Bemærk, at denne formular kun bruges til feedback.