WD-200B
FAQ & Fehlerbehebung |
The Head Band feels loose.
-
Is the pad thickness appropriate?
Follow the steps below to replace the pads (optional) with ones of an appropriate thickness.
-
Remove the left and right pads from the Head Band.
-
Align the pads with the mounting holes in the Head Band and attach the pads.
-
Remove the left and right pads from the Head Band.
-
Are you using the Rear Band?
Use the Rear Band to tighten the Head Band.
If you are not using the Rear Band, attach it as necessary.
Follow the steps below to attach it.
-
Press the circled area and slide the Head Band cover to remove it.
-
Attach one looped end of the Rear Band to the protrusion of the Head Band, and fit the Rear Band into the groove in the Head Band.
-
Press the circled area and slide the Head Band cover back into place.
After attaching the Head Band cover, make sure the Rear Band comes out through the hole in the Head Band.
-
Attach the other looped end of the Rear Band in the same way.
-
Use the Rear Band length adjuster to adjust the Rear Band to the desired length.
-
Press the circled area and slide the Head Band cover to remove it.
If the Head Band still feels loose when you are using the thickest pads (optional) and the Rear Band, it is time to replace the Head Band. For information about purchasing new Head Bands, contact your Brother dealer.
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.