TJ-4021TN
|
Nejčastější dotazy a pokyny pro odstraňování potíží |
How to reset the printer settings by directly operating the printer
Printer initialization clears the printer's DRAM and restores its factory settings.
-
Turn off the printer.
-
Press and hold the right Selection button, and then turn on the printer.
-
Release the button when Factory Default appears on the Touchscreen.
After the initialization, the following factory settings will be restored:
Parameter |
Default setting |
Speed |
127 mm/sec (5 ips) (203 DPI)
76 mm/sec (3 ips) (300 DPI) |
Density |
8 |
Label Width |
101.5 mm (4") |
Label Height |
101.5 mm (4") |
Sensor Type |
Gap sensor: TJ-4020TN, TJ-4021TN, TJ-4120TN, TJ-4121TN
Black sensor: TJ-4021TNR, TJ-4121TNR |
Gap Setting |
3 mm (0.12") |
Print Direction |
0 |
Reference Point |
0,0 (upper left corner) |
Offset |
0 |
Tear Mode |
On |
Peeler Mode |
Off |
Cutter Mode |
Off |
Rewinder Mode |
Off |
Code Page |
850 |
Country Code |
001 |
Clear Flash Memory |
No |
Pokud váš dotaz nebyl zodpovězen, prohlédli jste si další nejčastější dotazy?
Prohlédli jste si příručky?
Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.