NX-2000
![]() |
Nejčastější dotazy a pokyny pro odstraňování potíží |
"Turn off the power and replace the needle plate." appears on the LCD.
This message is displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed.
This message is displayed when the needle plate is removed with the machine on.
If the operation procedure was correct, the machine will beep once.
If the operation procedure was incorrect, the machine will beep twice or four times.
To turn the alarm on or off, press .
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.