HL-2460
 |
Nejčastější dotazy a pokyny pro odstraňování potíží |
JAM REAR (at paper exit)
|
If a paper jam occurs at paper exit, follow steps below:
-
Open the top cover of the printer.
-
Slowly pull the jammed paper from the paper exit with both hands.
-
Close the top cover of the printer.
If a paper jam occurs behind the face up output tray before the paper exits, follow steps below:
- Open the top cover of the printer.
If a duplex unit is installed on the printer, remove it from the printer. After removing the jammed paper, re-install the duplex unit onto the printer.
-
Open the face up output tray.
-
Slowly remove the jammed paper with both hands.
- Close the face up output tray.
-
Close the top cover of the printer.
Názory na obsah
Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.
