MFC-9120CN

Nejčastější dotazy a pokyny pro odstraňování potíží

Nejčastější dotazy a pokyny pro odstraňování potíží
  • Datum: 09/07/2015
  • ID: faq00000105_021

Reset the network settings to the factory default (video instructions available)

You can reset the network settings back to its default factory settings (resetting all information such as the password and IP address information) using the control panel as follows. Please note this function resets all wired and wireless network settings to the factory default.

NOTE: Videos shown below are from a representative product and may differ from your Brother machine.

*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
 

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  2. Press Menu. Press the Up or Down arrow key to choose Network, and then press OK.

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  3. Press the Up or Down arrow key to choose Network Reset, and then press OK.
    Press 1 to choose Reset, and press 1 to choose Yes for reboot.

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  4. The machine will re-start. Re-connect all the cables.

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)

 

<For touchscreen models>

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  2. Follow the steps below to reset the settings:
    1. Press MENU on the LCD screen.
    2. Press Network.
    3. Press the Up or Down arrow key to display Network Reset and then press Network Reset.
    4. Press Yes.
    5. Press Yes for 2 seconds to confirm.

     

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)
  3. The machine will re-start. Re-connect all the cables.

    Click on the image to play the video instructions.
    * This movie is being streamed from YouTube. (Opening new window.)

Pokud váš dotaz nebyl zodpovězen, prohlédli jste si další nejčastější dotazy?

Prohlédli jste si příručky?

Potřebujete-li další pomoc, kontaktujte zákaznický servis společnosti Brother:

Související modely

DCP-9010CN, DCP-9055CDN, DCP-9270CDN, MFC-7360N, MFC-7460DN, MFC-9120CN, MFC-9320CW, MFC-9460CDN, MFC-9970CDW

Názory na obsah

Chcete-li nám pomoci vylepšit naši podporu, uveďte níže vaše názory.

Krok 1: Jak vám informace na této stránce pomohly?

Krok 2: Chcete uvést další poznámky?

Upozorňujeme vás, že tento formulář slouží pouze pro názory.

Odeslat