RJ-3050
常见问题解答与故障排除 |
指示灯的含义有哪些?
指示灯通过亮起或闪烁来指示打印机的状态。以下符号说明不同指示灯颜色和模式的含义。
或 或 或
|
指示灯以所示颜色亮起 |
或 或 或
|
指示灯以所示颜色闪烁 |
或 或
|
指示灯以每种颜色闪烁 1 或 2 次,然后熄灭 |
指示灯以任意颜色或模式亮起或闪烁 | |
指示灯熄灭 |
RJ-3050
电源 |
状态 |
Wi-Fi |
蓝牙 |
说明 |
电源开启 | ||||
色带盒盖打开 | ||||
正在接收数据 正在传输数据 |
||||
错误 >> 有关更多信息,请参见下面 |
||||
错误 电池错误 大容量存储错误 |
||||
系统错误 | ||||
(每 3 秒 1次)
|
无线开启,未连接 | |||
无线开启,已连接 | ||||
(每秒 1 次) |
正在设置 WPS | |||
蓝牙开启 | ||||
(每秒 1 次) |
正在与蓝牙配对 | |||
正在重置 | ||||
格式化完成 (将 [打印后的数据] 设置为 [清楚所有打印数据] 时) | ||||
正在冷却 >> 有关更多信息,请参见下面 |
||||
处于大容量存储模式 |
||||
正在大容量存储模式下处理文件 |
||||
正在初始化 |
RJ-3050/3150
电池 |
说明 |
(每秒 1 次) |
电池需要充电 |
(每 4 秒 2 次) |
充电电池电量:低 |
(每 4 秒 1 次) |
充电电池电量:一半 |
正在充电 |
|
充电电池电量:已满 充电完成 |
指示灯警告
电源指示灯不亮
打印机未通电。
如果使用交流或直流电,确保已正确连接交流电适配器或车载直流电源线,并确保交流电或直流电插座已开启。
如果使用直流电,请检查保险丝。
打印头或电机过热。
打印头:
如果打印头变得过热,可能会在纸张上不需打印的区域中成像。当打印具有大量“黑色”内容的文档时,这种情况属于正常现象。
打印机将停止运作,等打印头冷却后再恢复打印。
要避免或延迟这种情况的出现,请使用较低浓度设置打印,减少打印的黑色空间量(例如,清除背景阴影和图片和演示文档中的颜色),并确保打印机良好通风而且未处在封闭的空间内。
电机:
请勿持续使用打印机。如果持续使用打印机,电机将变得过热。在这种情况下,打印机将停止运转,等电机冷却后再恢复打印。
当在高海拔位置 (超过约 3,000 米) 使用打印机时,由于可用于冷却打印机的空气密度较低,因此这种情况可能更加频繁。
当通信不稳定时,肯梦无法正确接收数据。当通信状况改善后,请尝试重新连接。
打印机处于引导模式
如果交流电适配器在固件正在更新时被拔下,打印机在下次启动时会以引导模式启动。
请联系您的经销商或兄弟工业株式会社客服部获取帮助。