LS-2125/2160

常见问题解答与故障排除

常见问题解答与故障排除
  • 日期： 2009-04-07
  • ID： faqh00000091_001

How do I remove the presser foot holder?


  1. Raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up.
    With models equipped with needle position button(needle position button), raise the needle by pressing needle position button(needle position button) once or twice.
    turn the handwheel

    or

    		 press needle position button

    1 Mark

    2 Needle position button
  2. Turn off the sewing machine.
    Turn off the sewing machine.

    Before replacing the presser foot, be sure to turn off the sewing machine. Otherwise, injuries may occur if a button is accidentally pressed and the machine starts sewing.

  3. Raise the presser foot lever. The presser foot is raised.
    Raise the presser foot lever. 1 Presser foot lever
  4. Press the black button at the back of the presser foot holder.
    The presser foot holder releases the presser foot.
    Press the black button. 1 Black button

    2 Presser foot holder
  5. Use the screwdriver to loosen the presser foot holder screw.
    The presser foot is removed from the presser bar.
    Use the screwdriver to loosen the presser foot holder screw. 1 Screwdriver

    2 Presser foot holder

    3 Presser foot holder screw

    4 Presser bar


您的问题未被解答时，是否查看过其它常见问题解答？

是否查看过说明书？

如果需要更多的帮助，请联系 Brother 客户服务中心：

相关型号

BM-3500/2600, Innov-is 1200, Innov-is 1250D, Innov-is 400, Innov-is 950, Innov-is 980D, Innov-is 980K, Innov-is 985D, LS-2125/2160, XL-2600/2620/2630, XL-5500, XL-5600, XL-5700

内容反馈

请在下方提供您的反馈，帮助我们改进支持服务。

步骤 1：本页上的信息对您有帮助吗？

步骤 2：您是否有其它意见需要添加？

请注意本表格仅用于提供反馈。

提交