HL-5595DN(H)

常见问题解答与故障排除

常见问题解答与故障排除
  • 日期： 2020-02-26
  • ID： faq00100210_500

Load and Print on Envelopes Using the MP Tray

You can load up to ten envelopes in the MP tray.

Before loading, press the corners and sides of the envelopes to make them as flat as possible.

When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type settings in the machine or on your computer, also.

  1. Open the machine's back cover (the face up output tray).
  2. On the front of the machine, open the MP tray and lower it gently.
  3. Pull out the MP tray support (1) and unfold the flap (2).
  4. Slide the MP tray paper guides to fit the width of the envelopes that you are using. If the paper guide on the right side has a lever, press it and slide the paper guide.
  5. Load envelopes in the MP tray.
    Load up to 10 envelopes in the MP tray with the printing surface face up. Make sure the envelopes are below the maximum paper mark (1). Loading more than 10 envelopes may cause paper jams.
  6. Send your print job to the machine.
    Change your print preferences in the Print dialog box before sending the print job from your computer.
    Settings
    Options for Envelopes

    Paper Size

    Com-10

    DL

    C5

    Monarch

    Media Type

    Envelopes

    Env. Thick

    Env. Thin

  7. Close the back cover (the face up output tray) until it locks in the closed position.

相关常见问题解答

您的问题未被解答时，是否查看过其它常见问题解答？

是否查看过说明书？

如果需要更多的帮助，请联系 Brother 客户服务中心：

相关型号

HL-5580D, HL-5585D, HL-5590DN, HL-5595DN(H)

内容反馈

请在下方提供您的反馈，帮助我们改进支持服务。

步骤 1：本页上的信息对您有帮助吗？

步骤 2：您是否有其它意见需要添加？

请注意本表格仅用于提供反馈。

提交