MFC-9440CN

常见问题解答与故障排除

The error message "[model name] cannot be found. ... (CC3-202-03031b02)" appears when scanning a document using ControlCenter3 on Windows 7 with the USB connection.

Please make sure that your Brother machine is ON and it is correctly connected to your computer by the USB cable.

If the Full Driver & Software Packages downloaded from the "Download" section was installed into your computer with the built-in driver already installed, the TWAIN driver was not installed. Since ControlCenter3 uses the TWAIN driver when scanning, this error occurs. Please go to Step 1 to check if the TWAIN driver is installed correctly.

The built-in driver is included with Windows 7 and installed automatically by connecting your machine to the Windows 7 computer via the USB interface. The built-in driver is also called "Inbox driver".
TWAIN driver makes the scanner compatible with any TWAIN-supporting software.

Step 1: How to check if the TWAIN driver is installed correctly

Make sure that your Brother machine is ON and it is correctly connected to your computer by the USB cable.
Click Start => Control Panel => Hardware and Sound => Device Manager.
Click Imaging devices. Right-click your Brother machine and select Properties.
Click Driver tab and Driver Details button.
Check if the C:\\Windows\TWAIN_32\BrMfSc09b folder exists.
Notes:
Even if you use Windows 7 64-bit, check for the C:\\Windows\TWAIN_32\BrMfSc09b folder.
- If you do not see this folder, the TWAIN driver is not installed. To install the TWAIN driver, you need to uninstall the Full Driver & Software Packages and reinstall them. Please go to Step 2.
- If you see the folder, the TWAIN driver is installed correctly. It is thought the error arises from other causes. Please refer to other "FAQs & Troubleshooting" or contact Brother Customer Service from "Contact Us".

Step 2: How to uninstall and reinstall the Full Driver & Software Packages

Click Start => All Programs => Brother => [model name] => Uninstall and follow the instructions on screen.
After completing the uninstall process, please make sure you disconnect the USB cable between your machine and computer.
Click the link below to download and reinstall the latest "Full Driver & Software Packages".

- Full Driver & Software Packages for "32-bit"

- Full Driver & Software Packages for "64-bit"