Check the following points to resolve the paper feed issue.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

STEP 1: Make sure the paper is loaded correctly in the paper tray.

• Do not load the several different kinds of paper.
  You cannot load several kinds of paper in the paper tray simultaneously. Remove the different kinds of paper.
   
• Ensure the paper do not adhere to each other.
  Remove all the paper from the tray and fan the stack of paper well, then put it back in the tray.
  
  

   

• Ensure the papers do not lift at the back of the tray.
  When loading paper, be careful not to push the paper in too far. It may lift at the back of the tray and cause paper feed issues. Gently put the paper into the paper tray, and check the paper is flat in the tray as below.
  
  
   
• Do not add paper before the tray is empty.
  If you want to add more paper before the tray is empty, remove the paper from tray and combine it with the paper you are adding. Always fan the stack of paper well before loading it in the tray.

STEP 2: Make sure the Jam Clear Cover is closed correctly.

Close the Jam Clear Cover. Make sure the cover is closed completely

STEP 3: Make sure the Base Pad in the paper tray is not dirty.

If the machine has been feeding multiple pages when there are only a few sheets of paper left in the tray, clean the Base Pad.
> Click here to see how to clean the base pad.