PS-9000
 |
FAQ et Diagnostic |
How do I reset the PS-9000 to factory default settings?
[Method 1]
- Make sure that the AC adapter is not connected to the product.
- While pressing the push button, connect the AC adapter to the product.
- The STATUS LED (orange) will blink once when the power connection is made.
- Hold down the push button for two seconds.
- The STATUS LED (orange) will constantly light and the reset to factory default is completed.
- Release the push button.
- Do not turn off the PS-9000 while it is being initialized to the factory default settings.
- When the PS-9000 is turned on again after being initialized to the factory default settings, do not press the push button.
[Method 2: using the Brother PS-9000 Utility]
- Select PS-9000 in the PS-9000 setting dialog box of the Brother PS-9000 Utility.
- Click [initialized].
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
