MFC-J6945DW

FAQ et Diagnostic

When I update the firmware, my machine's screen shows vertical bar or its LEDs indicate an error.

When updating the firmware, my machine powers off. After that I turn on the machine and the machine's display or LED indication shows as below.

For the models with LED indication

For the models with the display

Follow the steps below to update your machine's firmware again.

You need to connect the machine with USB cable to update the firmware.

Windows

If you have not use this machine with USB cable, install the driver from the supplied CD-ROM or download the Full Driver & Software Package and install it for USB connection.
> Click here to download Full Driver & Software Package in the Downloads section.
Download Firmware Update Tool and update the firmware with USB connection again.
> Click here to download Firmware Update Tool in the Downloads section.

macOS

Download Firmware Update Tool and update the firmware with USB connection again.

> Click here to download Firmware Update Tool in the Downloads section.

Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?

Avez-vous consulté les manuels?

Aller à la section Manuels

Pour toute assistance supplémentaire, contactez le service clientèle de Brother:

Aller à la section Nous contacter

Modèles apparentés

DCP-J1100DW, DCP-J572DW, DCP-J774DW, HL-J6000DW, HL-J6100DW, MFC-J1300DW, MFC-J497DW, MFC-J5330DW, MFC-J5730DW, MFC-J5930DW, MFC-J5945DW, MFC-J6530DW, MFC-J6930DW, MFC-J6935DW, MFC-J6945DW, MFC-J6947DW, MFC-J890DW, MFC-J895DW

Commentaires sur le contenu

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.