PT-P710BT

FAQ et Diagnostic

Using the Device settings (for Windows)

To use the Device settings, please follow the steps below:

Open the Printer Setting Tool.
Refer to the FAQ: "Using the Printer Setting Tool (for Windows)".
Select Device settings.

The Device settings window appears.
Specify or change the settings.

Power Settings
- Auto Power ON
  Specifies whether or not the printer turns on automatically when USB cable is connected.
  Available settings: On, Off
- Auto Power Off (USB Connection)
  Specify the amount of time that passes before the printer turns off automatically when running with USB cable.
  Available settings: None, 10/20/30/40/50 minutes, 1/2/4/8/12 hours
- Auto Power Off (Li-ion)
  Specify the amount of time that passes before the printer turns off automatically when running on Li-ion battery.
  Available settings: None, 10/20/30/40/50 minutes, 1 hour
Print Information Report
- Contents
  Specifies the printer information that will be printed.
  Available settings: All/Usage Log/Printer Settings
Calibration
- Length Adjustment:(R)
  Adjusts the length of the printed label to correspond to the length of the label displayed on the computer.
  Available settings: -3% to +3% (1% increments)
After changing the settings, click Apply - Exit, and then click Exit in the main window to finish specifying settings.

PT-P710BT

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.