TJ-4020TN
|
FAQ et Diagnostic |
How to clean the Platen Roller
Clean the Platen Roller when replacing the label roll with a new one.
To clean the Platen Roller, follow the steps below:
-
Turn off the printer.
-
Open the Media Cover.
-
Push the Print Head Release Lever to open the Print Head.
-
Rotate the Platen Roller and wipe it thoroughly with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol.
-
Close the Print Head by pushing down on both sides and make sure it locks into place.
-
Close the Media Cover.
Calibrate the Gap/Black Mark Sensor every time you change the media.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
TJ-4005DN, TJ-4020TN, TJ-4021TN, TJ-4021TNR, TJ-4120TN, TJ-4121TN, TJ-4121TNR
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.