TD-4650TNWB
![FAQ et Diagnostic FAQ et Diagnostic](/g/b/shared/img/module/icon_question_33.png) |
FAQ et Diagnostic |
How to clean the Platen Roller
Clean the Platen Roller when replacing the label roll with a new one.
To clean the platen roller, follow the steps below:
-
Turn off the printer.
-
Press the tabs on both sides of the printer, and then lift the Roll Compartment Cover.
![Open cover Open cover](/g/b/img/faqend/faqp00001455_004/eu_ot/en/2356983/cover_open.gif)
-
Rotate the Platen Roller and wipe it thoroughly with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol.
![Wipe Platen Roller Wipe Platen Roller](/g/b/img/faqend/faqp00001455_004/eu_ot/en/2356984/platen.gif)
-
Gently press down on both sides of the Roll Compartment Cover to close it.
![Close cover Close cover](/g/b/img/faqend/faqp00001455_004/eu_ot/en/2356985/cover_close.gif)
Calibrate the Gap/Black Mark Sensor every time you change the media.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.