Innov-is XP1
 |
FAQ & Fehlerbehebung |
Cannot thread the needle.
-
Needle is not in the correct position.
Press the Needle Position button to raise the needle.
 |
(1) Needle Position button |
-
Needle is installed incorrectly.
Reinstall the needle correctly.
Refer to How do I change the needle ?
-
Needle is turned, bent or the point is dull.
Replace the needle.
Refer to How do I change the needle ?
-
Upper threading is incorrect.
Check the steps for threading the machine and rethread the machine.
Refer to How do I thread my machine ?
-
The needle threader hook is bent and does not pass through the eye of the needle.
Contact your authorized Brother dealer.
-
The needle threader lever cannot be moved or returned to its original position.
Contact your authorized Brother dealer.
-
A size 65/9 needle is being used.
The needle is incompatible with the needle threader. Manually pass the thread through the eye of the needle.
Refer to How do I thread my machine ?
Wenn Ihre Frage nicht beantwortet werden konnte, haben Sie andere FAQ geprüft?
Haben Sie in den Handbüchern nachgesehen?
Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.
