KD144s
 |
FAQ et Diagnostic |
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- Use only the ungummed hook-and-loop fastener which is for sewing. If the glue is attached to the needle or the bobbin hook race, it may cause malfunction.
- If the hook-and-loop is sewn with the thin needle (65/9-75/11), the needle may bend or break.
- Before start sewing, baste together the fabric and the hook-and-loop fastener.
Make sure that the needle passes through the hookand-loop fastener by turning the handwheel and lower the needle into the hook-and-loop fastener before sewing. And then, sew the edge of the hookand-loop fastener at a slow speed.
If the needle does not pass through the hook-andloop fastener, replace the needle with the needle for thick fabrics.
 |
 Edge of the hook-and-loop fastener |
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
