ADS-2200
 |
FAQ et Diagnostic |
Load a Plastic Card
- Adjust the Paper Guides (1) to fit the width of your document.
- Place the card, face down, top edge first in the ADF between the Paper Guides until you feel it touch the inside of the machine.
- Load only one plastic card at a time.
- Certain types of plastic cards may be scratched when scanned.
- Rigid cards may not be fed correctly.
- If the surface of the card is dirty with grease marks (for example, fingerprints) or similar, wipe the dirt off before scanning.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
