HL-L8260CDW
![FAQ et Diagnostic FAQ et Diagnostic](/g/b/shared/img/module/icon_question_33.png) |
FAQ et Diagnostic |
Reset the Belt Unit Counter
When you replace a belt unit with a new one, you must reset the belt unit counter by completing the following steps:
DO NOT reset the belt unit counter unless you are replacing the belt unit.
-
Make sure the machine is turned on.
-
Press the Up or Down arrow key to select Machine Info., and then press OK.
-
Press the Up or Down arrow key to select Parts Life, and then press OK.
-
Press the Up or Down arrow key to select Belt, and then press OK.
-
Press and hold OK for about five seconds.
-
Press the Up arrow key to select Reset.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
HL-L8260CDW
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.