ADS-1100W
![FAQ et Diagnostic FAQ et Diagnostic](/g/b/shared/img/module/icon_question_33.png) |
FAQ et Diagnostic |
Changing scan settings in ControlCenter.
To display the scan settings in ControlCenter, follow the steps below.
NOTE: The screens may differ depending on operating system being used and your Brother machine
-Windows
-Macintosh
Windows
-
In the Scan tab, right-click the button you want to configure, and then click Button settings.
The settings dialog box appears.
![Click Button settings Click Button settings](/g/b/img/faqend/faq00100150_000/eu_ot/en/1011328/Windows_ClickButtonSettings.jpg)
-
Change the settings as needed, and then click OK.
![Settings dialog box Settings dialog box](/g/b/img/faqend/faq00100150_000/eu_ot/en/1011329/Windows_SettingsDialogBox.jpg)
-
The machine will now use the new settings when you scan from ControlCenter4.
Macintosh
-
In the Scan tab (1), press and hold the Control key and click the button you want to configure.
The settings dialog box appears.
![Click SCAN tab Click SCAN tab](/g/b/img/faqend/faq00100150_000/eu_ot/en/1011330/Mac_ClickSCANTab.jpg)
-
Change the settings as needed, and then click OK.
![Settings dialog box Settings dialog box](/g/b/img/faqend/faq00100150_000/eu_ot/en/1011331/Mac_SettingsDialogBox.jpg)
-
The machine will now use the new settings when you scan from ControlCenter2.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
ADS-1100W, ADS-1600W, ADS-2100, ADS-2100e, ADS-2400N, ADS-2600W, ADS-2600We, ADS-2800W, ADS-3000N, ADS-3600W
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.