MFC-J4510DW

FAQ et Diagnostic

FAQ et Diagnostic
  • Date: 26.03.2015
  • ID: faq00100128_000

I still receive the error message "Cover is Open" after I closed the scanner cover. (With Video Instructions)

If you still receive the error message Cover is Open, the scanner cover support and scanner cover damper may have not be mounted correctly.

 

The scanner cover support is the bar to support the scanner cover when you lift the scanner cover into the open position.
The scanner cover damper is located inside the left side of the scanner cover as shown in the image below.

scanner cover support and scanner cover damper

Follow the steps listed below to resolve this issue.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

Place the machine on a bright flat surface for mounting the scanner cover support.
If you place the machine on a slope, you may catch your hand under the scanner cover.

  1. Remove the scanner cover support and scanner cover damper from your Brother machine.
    If the scanner cover support and scanner cover damper have already come off, continue to STEP 2.

     

    *The video clip is being streamed from YouTube.
    How to use the buttons:

    Start the video

    		 Start the video

    Skip the video

    		 Skip the video

    Stop the video

    		 Stop the video

    Restart the video

    		 Restart the video
    Running Time: 1.5 minutes
    Operating Time: 5-10 minutes
     
  2. Mount the scanner cover support and scanner cover damper to your Brother machine.

     

    *The video clip is being streamed from YouTube.
    How to use the buttons:

    Start the video

    		 Start the video

    Skip the video

    		 Skip the video

    Stop the video

    		 Stop the video

    Restart the video

    		 Restart the video
    Running Time: 3.5 minutes
    Operating Time: 5-10 minutes

 

Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?

Avez-vous consulté les manuels?

Pour toute assistance supplémentaire, contactez le service clientèle de Brother:

Modèles apparentés

DCP-J4110DW, DCP-J4120DW, MFC-J4410DW, MFC-J4420DW, MFC-J4510DW, MFC-J4610DW, MFC-J4620DW, MFC-J4625DW, MFC-J4710DW

Commentaires sur le contenu

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.

Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?

Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?

Ce formulaire a pour seul but de nous faire part de vos commentaires.

Envoyer