Modèle retiré. Cette page n'est plus mise à jour.

IGNORE DATA

Follow the procedure below to clean this message;

 


  1. Switch the printer off and then on again.

  2. Set the "ERROR PRINT" setting ON.
    (From the Control Panel, "PRINT MENU"->"BR-SCRIPT"->"ERROR PRINT")

  3. Try to print the document again.

  4. If you still get see the same error message, try re-sending the print job at a lower resolution.

  5. Alternatively, try adding more memory to the printer.
    =>How to install additional memory (for HL-1650/1670N users)
    =>How to install additional memory (for HL-1850/1870N users)

If it's only one page you cannot print, or the problem occurs using a specific application, a setting within the application could be causing the problem.
Please contact your software vendor, or visit your software vendors web site, to see if they can help.

Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?

Avez-vous consulté les manuels?

Pour toute assistance supplémentaire, contactez le service clientèle de Brother:

Modèles apparentés

HL-1650, HL-1670N, HL-1850, HL-1870N

Commentaires sur le contenu

Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.

Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?

Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?

Ce formulaire a pour seul but de nous faire part de vos commentaires.