MFC-9340CDW

FAQ & Fehlerbehebung

FAQ & Fehlerbehebung

Jam Rear

If the machine's display shows the message Jam Rear, a paper jam occurred behind the back cover. Follow the steps below to clear the message Jam Rear.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

  1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.

  2. Open the back cover.

    Open back cover


  3. Pull the green tabs at the left and right sides toward you to release the fuser cover (1).

    Release fuser cover


  4. Use both hands to gently pull the jammed paper out of the fuser unit.

    Pull out jammed paper


  5. Close the fuser cover (1). Make sure the green tabs at the left and right sides lock into place.

    Close fuser cover


  6. Close the back cover until it locks in the closed position.

Wenn Ihre Frage nicht beantwortet werden konnte, haben Sie andere FAQ geprüft?

Haben Sie in den Handbüchern nachgesehen?

Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:

Relevante Modelle

DCP-9015CDW, DCP-9020CDW, MFC-9140CDN, MFC-9330CDW, MFC-9340CDW

Rückmeldung zum Inhalt

Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.

Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?

Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?

Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.