MFC-L2700DW
 |
FAQ et Diagnostic |
Envelope creases
Check the following points to resolve the issue:
-
Make sure the two green levers inside the back cover are pulled down to the envelope position when you print envelopes.
After you have finished printing, reset the levers back to their original positions. Pull up the levers until they stop.
- Make sure envelopes are printed with the back cover (face-up output tray) opened.
- Make sure envelopes are fed only from the manual feed slot.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
