NC-2200w
![]() |
FAQ et Diagnostic |
How do I disable the APIPA protocol?
To disable the APIPA protocol do the following:
-
Switch the printer off.
-
Switch the printer on holding down the "Go" button
-
Wait until the Toner LED is lit.
-
Depress the "Go" button and press it again. The Drum LED will light, the Paper LED will light, then the Status LED will light orange.
-
Continue to depress the "Go" button until the "Status" LED changes to Green.
-
Depress the "Go" button.
APIPA protocol is now disabled.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.