QL-500
FAQ et Diagnostic
How do I install/change the label roll?
To install a new label roll
To remove the label roll
To install a new label roll:
Press the ON/OFF button to turn the printer off.
Hold the DK Roll compartment cover at the sides near the front of the printer and firmly lift it up to open.
Pull up the roll release lever (1) and remove the protection sheet (2) of printing unit. (QL-500/550 only)
Insert the spool of the DK Roll along the spool guides of the printer.
Make sure that the spool arms (3) are inserted firmly in the spool guides (4) on the left and right sides.
Lift up the roll release lever (5) and then thread the end of the DK Roll into the printing unit (6) immediately before the cutter (7).
If you are unable to thread the end of the DK Roll into the printing unit, thread it as far as possible, lower the roll release lever and close the cover. Then press the FEED button to set the roll.
Lower the label lever and then close the DK Roll compartment cover.
To remove the label roll:
Press the ON/OFF button to turn the printer off.
Hold the DK Roll compartment cover at the sides near the front of the printer and firmly lift it up to open.
Lift up the label lever.
Hold the label roll by the spool arms and pull the inserted DK Roll up.
Lower the label lever and then close the DK Roll compartment cover.
S'il n'existe aucune réponse à votre question, avez-vous consulté les autres FAQ?
Avez-vous consulté les manuels?
Pour obtenir une aide supplémentaire, contactez le service à la clientèle Brother:
Remarques sur le contenu
Pour nous aider à améliorer notre soutien, veuillez nous faire part de vos commentaires ci-dessous.
Installation Configuration de la machine Connexion à un ordinateur P-touch Editor (Windows) P-touch Editor (Mac) Impression Réseau Logiciel Appareil systèmes d'exploitation Entretien Installation Logiciel P-touch Editor (Windows) P-touch Editor (Mac) Messages d'erreur / indications LED Connexion à un ordinateur Impression DésInstallation Appareil systèmes d'exploitation Installation Entretien Caractéristiques
Procédures de configuration générale
USB
Numérotation Codes barres Mise en page Add-ins Modèles Impression Utilisation du logiciel Carnet d'adresses Base de données
Numérotation Codes barres Mise en page Modèles Impression Utilisation du logiciel Base de données
Qualité d'impression / Paramètres d'impression Impression distribuée (Windows uniquement) Mise en page
Pilote d'impression Carnet d'adresses (Windows uniquement) P-touch Transfer Manager (Windows uniquement)
Procédure de réinitialisation Opérations
Mac Windows Linux
Pilote d'imprimante P-touch Address Book Printer Setting Tool P-touch Transfer Manager (Windows uniquement) P-touch Library
Paramètres réseau
Entretien matériel
Qualité d'impression Support d'impression Bases de données Add-ins Codes barres Messages d'erreur Fonctionnement Impossible d'imprimer
Fonctionnement Impossible d'imprimer Qualité d'impression Messages d'erreur Bases de données
Échec d'installation Impossible d'imprimer Paramètres réseau
Impossible d'imprimer Qualité d'impression / Paramètres d'impression
Mise en page Bourrage Papier /Bande/étiquette
Appareils Alimentation électrique Procédure de réinitialisation
Opérations
Produit Application Consommables&Accessoires
Pilote d'impression
Logiciels
Logiciels
Indications LED Messages d'erreur sur l'écran de votre ordinateur
Entretien matériel
Logiciels
Mac
Windows
Linux