FAX-2840
![]() |
FAQ et Diagnostic |
Cover is Open
Check the solution applicable for your case.
Case 1: The front cover is not completely closed.
Close the front cover of the machine.
Case 2: The Control panel cover is not completely closed.
Make sure that the Control panel cover of your machine is completely closed.
Case 3: The Control panel cover was open when you loaded a document.
Close the Control panel cover of the machine, then press Stop/Exit.
Case 4: The fuser cover is not completely closed or paper was jammed in the back of the machine when you turned on the power.
- Close the fuser cover of the machine.
- Make sure paper is not jammed inside the back of the machine, and then close the fuser cover and press Start.
Remarques sur le contenu
Pour nous aider à améliorer notre soutien, veuillez nous faire part de vos commentaires ci-dessous.