HL-2170W
 |
Perguntas frequentes e Solução de problemas |
Reset the print server to the default factory settings
If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow the steps below:
-
Turn off the printer.
-
Make sure that the front cover is closed and the power cord is plugged in.
-
Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Error LEDs light up. Release the Go button. Make sure that the Toner, Drum and Error LEDs are off.
-
Press the Go button seven times. Make sure that all the LEDs light up to indicate the print server has been reset to its default factory setting.
Se você precisar de assistência adicional, entre em contato com o atendimento ao cliente da Brother:
Comentários sobre o conteúdo
Para ajudar-nos a melhorar nosso suporte, forneça seus comentários abaixo.
