DCP-9055CDN

ЧЗВ и отстраняване на неизправности

ЧЗВ и отстраняване на неизправности

When I send a fax from the machine, an error "not register." or "not registered." is displayed.

The "Fax to server" may be "ON" and this may cause the problem.
To solve the problem make sure that "Fax to server" is "OFF".
There are two ways to change the settings of "Fax to server": By using the control panel and by using the Web Based Management.

Please choose the appropriate way and use the following steps below.

 

Method1: using the control panel

  1. Press Menu.
  2. Select LAN or Network and Fax to Server.
  3. Select Off and then press OK.
  4. Press Stop/Exit.

 

Method2: using the Web Based Management

  1. Start your web browser.
  2. Type "http://machine's IP address/" into your browser (where "machine's IP address" is the machine's IP address).
    - For example: http://192.168.1.2/
  3. Click I-Fax Settings and Fax to Server.
  4. Select Off.

    Web Based Management screen

  5. Click Submit.

Проверихте ли в ръководствата?

Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:

Обратна връзка за съдържанието

За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.

Стъпка 1: Как ви помага информацията на тази страница?

Стъпка 2: Искате ли да добавите коментар?

Имайте предвид, че този формуляр се използва само за обратна връзка.