TJ-4021TN
|
ЧЗВ и отстраняване на неизправности |
How to clean the Platen Roller
Clean the Platen Roller when replacing the label roll with a new one.
To clean the Platen Roller, follow the steps below:
-
Turn off the printer.
-
Open the Media Cover.
-
Push the Print Head Release Lever to open the Print Head.
-
Rotate the Platen Roller and wipe it thoroughly with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol.
-
Close the Print Head by pushing down on both sides and make sure it locks into place.
-
Close the Media Cover.
Calibrate the Gap/Black Mark Sensor every time you change the media.
Ако няма отговор на вашия въпрос, проверихте ли други ЧЗВ?
Проверихте ли в ръководствата?
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.