TJ-4021TN
![ЧЗВ и отстраняване на неизправности ЧЗВ и отстраняване на неизправности](/g/b/shared/img/module/icon_question_33.png) |
ЧЗВ и отстраняване на неизправности |
How do I clean / maintain my printer?
> Clean the Sensors
> Clean the Tear Bar/ Peel Bar
> Clean the Exterior/ Interior
Clean the Sensors
-
Turn off the printer.
-
Open the Media Cover.
![Open the Media Cover Open the Media Cover](/g/b/img/faqend/faqp00001434_014/eu_ot/en/2387436/g_001.gif)
-
Push the Print Head Release Lever to open the Print Head.
![Open the Print Head Open the Print Head](/g/b/img/faqend/faqp00001434_014/eu_ot/en/2387437/g_030.gif)
-
Use compressed air or vacuum to clean the Black Mark Sensor and Gap Sensor.
![Clean the Black Mark Sensor and Gap Sensor Clean the Black Mark Sensor and Gap Sensor](/g/b/img/faqend/faqp00001434_014/eu_ot/en/2387440/g_025.gif)
1. Black Mark Sensor
2. Gap Sensor
We recommend cleaning the sensors once per month.
Clean the Tear Bar/ Peel Bar
-
Turn off the printer.
-
Open the Media Cover.
![Open the Media Cover Open the Media Cover](/g/b/img/faqend/faqp00001434_014/eu_ot/en/2387436/g_001.gif)
-
Wipe the Tear Bar and the Peel Bar with a lint-free cloth dipped in isopropyl alcohol or ethanol, as needed.
![Wipe the Tear Bar and the Peel Bar Wipe the Tear Bar and the Peel Bar](/g/b/img/faqend/faqp00001434_014/eu_ot/en/2387441/g_026.gif)
1. Tear Bar
2. Peel Bar
Clean the Exterior/ Interior
Exterior: Wipe with a lint-free cloth dipped in water, as needed.
Interior: Use a brush or vacuum, as needed.
Ако няма отговор на вашия въпрос, проверихте ли други ЧЗВ?
Проверихте ли в ръководствата?
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.