If embroidery data other than our original patterns are used, the stitch length may be too short, possibly resulting in the thread or the needle breaking. In order to prevent this problem from occurring, the machine can be set to delete stitches with a short stitch length. Stitches with a length less than that specified in this function, can be deleted.
When the embroidery machine is purchased, “0.3” was selected (delete stitches with a length of 0.3 mm or less).
Press (setting key) at the bottom of the display.
The settings screen appears, press to display page 2 of the settings screen.
Touch "+" and "-" to select the stitch length.
The desired size is displayed.
A value between 0 and 1 millimeters if the units of measurements is set to “mm” (or a value between 0 and 0.04 inch if the units of measurements is set to “inch”) can be specified.
If the setting is changed from the previous setting, the new setting is only applied to the next embroidery.
Ако няма отговор на вашия въпрос, проверихте ли други ЧЗВ?
(setting key) at the bottom of the display.
to display page 2 of the settings screen.
