CM600
![]() |
ЧЗВ и отстраняване на неизправности |
The mat cannot be fed out.
Possible Causes (or Results)
The material to be cut/drawn or original to be scanned is jammed in the feeding mechanism in the machine.
Solutions
Press the “Feed” button while the mat is being inserted to feed it out.
If the mat does not feed out, turn off the machine, and then carefully pull out the mat.
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.