1. Connect your Brother machine to your mobile device without using a wireless router
You can set up a wireless network connection between your machine and a mobile device without using a wireless router or access point.
Follow the steps below to set up a Brother machine on a wireless network with a wireless router or access point.
Настройка на устройството
Натиснете бутон Save.
Натиснете Network.
Press Wi-Fi Direct.
Press Group Owner.
Press Manual.
When Wi-Fi Direct On? appears, press 1 to enable the Wi-Fi Direct network. You will need this information later.
1.2 Set up your mobile device
When you have finished setting up your Brother machine, follow the instructions below:
Android™
iPhone®, iPod touch®, iPad™
Tap the Settings icon.
Tap Wi-Fi.
If your Wi-Fi is turned off, turn it on.
Find the Network Name (SSID) you wrote down earlier, and then tap it.Find the Network Name (SSID) you wrote down earlier, and then tap it.
Enter the Network Key (Password) you wrote down earlier, and then tap CONNECT.
Enter the Network Key (Password) you wrote down earlier, and then tap Join.Enter the Network Key (Password) you wrote down earlier, and then tap Join.
The wireless connection setup is complete if Connected appears under the Network Name (SSID) you selected.
The wireless connection setup is complete if a check mark appears next to the Network Name (SSID) you selected.
Download Brother iPrint&Scan for Android devices for free from Google Play™.Download Brother iPrint&Scan for Android devices for free from Google Play™.
Download Brother iPrint&Scan for Apple devices for free from the
App Store.
2. Connect your Brother machine to your mobile device using a wireless router
To set up your Brother machine on a wireless network with a wireless router or access point, follow the steps below.
2.1 Before you set up your connection
Write down the Network Name (SSID) and Network Key (Password) of your wireless router or access point. You will need this information later.
After checking the network information of your wireless router or access point, go to the next step.
2.2 Set up the Brother machine
Press Wi-Fi.
Натиснете Помощ.за настр.
When the question Switch Network interface to wireless? or Network I/F switched to Wireless. or Enable WLAN? appears, press Yes to accept. The wireless setup wizard starts.
Устройството ще сканира за налични мрежи и ще покаже списък с SSID. Select the Network Name (SSID) you wrote down earlier. Натиснете OK.
If the machine asks to use WPS, select No.
Въведете WEP key (ключ) който записахте по-рано и натиснете OK.
Натиснете OK.
След това натиснете Да, за да приложите към вашите настройки.
The machine tries to connect to the device you have selected.
If your mobile device connected successfully
If the connection failed
The machine's LCD displays Connected.
The machine will print a wireless connection report. Check the error code on the printed report.
The machine will print a wireless connection report.
For more information about error codes and solutions, click here. . For more information about error codes and solutions, click…
2.3 Set up your mobile device
When finished configuring your Brother machine, do one of the following to configure your mobile device:
Android™
iPhone®, iPod touch®, iPad™
Tap the Settings icon.
Tap Wi-Fi.Tap Wi-Fi.
If your Wi-Fi is turned off, turn it on.
Find the Network Name (SSID) you wrote down earlier, and then tap it.
Enter the Network Key (Password) you wrote down earlier, and then tap CONNECT.
Enter the Network Key (Password) you wrote down earlier, and then tap Join.
The wireless connection setup is complete if Connected appears under the Network Name (SSID) name you selected.
The wireless connection setup is complete if a check mark appears next to the Network Name (SSID) name you selected.
Download Brother iPrint&Scan for Android devices for free from
Google Play™.
Download Brother iPrint&Scan for Apple devices for free from the
App Store.
Ако няма отговор на вашия въпрос, проверихте ли други ЧЗВ?