Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver.
Media Type: Transparencies Paper Source: Tray1
Pull the paper tray completely out of the printer.
While pressing the blue paper-guide release levers, slide the paper guides to fit the transparency size. Check that the guides are firmly in the slots.
Put transparencies in the tray. Check that the transparencies are flat and below the maximum paper mark (t). Do not put more than 10 transparencies in the tray at any one time, or it may cause a jam.
Put the paper tray firmly back in the printer.
Pull out the support flap to prevent transparencies from sliding off the top output tray.
Send the print data to the printer.
Ако няма отговор на вашия въпрос, проверихте ли други ЧЗВ?
